MultiModem rCell Intelligent Wireless Router
10
Multi-Tech Systems, Inc. Quick Start Guide
Note:
The pc settings must be in the same subnet range as
the router.
The factory default settings for the router are:
IP Address:
192.168.2.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.2.2
●
Select
Use the following DNS server addresses.
●
Enter the IP Address for the
Preferred DNS Server
.
Example: 205.171.3.65
●
Click
OK
.
●
Close the
Local Area Properties
screen by clicking
OK
.
●
Close the
Control Panel
.
●
Repeat these steps for each PC on your network.
AT Command for Verifying Signal Strength
To communicate directly with the cellular modem to verify signal
strength, network registeration, and roaming status, telnet to the modem.
Note:
Ensure that the Status LED is blinking, indicating that the router is
ready.
1.
To Telnet to the modem. You can access the modem thru the Run
icon or from the Command Prompt:
Click
Start I Run
icon. In the Open window, enter
cmd
and then
press
ENTER
.
or
Click
Start I All Programs I Accessories I Command Prompt
●
In the command window, type
telnet 192.168.2.1 5000
●
At the Login prompt, type the default user name:
admin
(all
lower-case). Press
ENTER
●
At the Password prompt, type the default pass word:
admin
(all lower-case). Press
ENTER
2.
In the command window, type
AT+CSQ
