Multitech MultiModem rCell MTCBA-H3-EN3-P1 Скачать руководство пользователя | Manualshive

Страница: 51 / 71

background image

Chapter 3 – Using the Web Management Software

51

Multi-Tech Systems, Inc. MultiModem rCell User Guide

Local LAN

Internal subnet of the local security gateway for which the security services should be
provided. If the router acts as a host, this should be configured as None.

Remote Gateway IP

Interface where the IPSec tunnel ends. In the case of a Road Warrior with a Dynamic IP
address, this should be configured to

ANY

.

FQDN

FQDN is a Fully Qualified Domain Name that resolves to the Local Wan IP of the router
or in the case of GRE/IPSEC, it is used to identify the Wan IP of the remote location. This
is provided by your ISP or created by you if you are using a Dynamic DNS service. When
FQDN is selected, the Remote Gateway IP should be left blank.

Remote LAN

Internal subnet of the remote security gateway for which the security services should
be provided. If the remote end is the host, this should be configured as None.

UID

(Unique Identifier String) Check the UID box to enable the Local ID and Remote ID.
Local ID and Remote ID are active only when UID is enabled.

Local ID

Enter a string identifier for the local security gateway.

Remote ID

Enter a string identifier for the remote security gateway.

NetBIOS Broadcast

Check this option to enable broadcasts over the connection. It will allow computers on
the network to share Microsoft file and printer sharing information.

Click

Save

to save these settings.

Add Manual Connection

Add a Manual Connection

Connection Name

Enter a text name that will identify the connection for you.

Compression

Check the compression checkbox to enable IPCOMP, the compression algorithm.

Authentication Method

Select the authentication algorithms to be used for the respective security services.
Options are: MD5-96 and SHA1-96.

«
...
49
50
51
52
53
...
»

Содержание MultiModem rCell MTCBA-H3-EN3-P1








































































Отзывы:

Нет отзывов

Похожие инструкции для MultiModem rCell MTCBA-H3-EN3-P1

MSR900-E Routers

Бренд: H3C Страницы: 38

Бренд: H3C Страницы: 64

DAP-2590 - AirPremier N Dual Band PoE Access...

Бренд: D-Link Страницы: 90

DWL-7200AP - AirPremier AG - Wireless Access...

Бренд: D-Link Страницы: 12

Бренд: Arris Страницы: 2

Бренд: UniFi Страницы: 4

3CRWE675075 - 11a/b/g Wireless LAN Workgroup...

Бренд: 3Com Страницы: 70

Бренд: TP-Link Страницы: 2

Бренд: Binatone Страницы: 14

Бренд: NETGEAR Страницы: 2

Бренд: Edimax Страницы: 2

Бренд: ENKHO Страницы: 48

Бренд: Amigo Страницы: 9

Бренд: Koma Страницы: 2

Бренд: Honeywell Страницы: 4

OnCell 3150A-LTE-EU

Бренд: Honeywell Страницы: 8

Бренд: Honeywell Страницы: 3

Бренд: Honeywell Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды