Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem rCell User Guide
30
Time Zone Configuration
Time Zone:
Enter your time zone. Default = UTC (Universal Coordinated Time, Universal Time). See
the following Web site for Time Zone information:
http://wwp.greenwichmeantime.com/info/current-time.htm
Time Zone Offset:
Enter +/- hh:mm. Default = +00:00. Offset is the amount of time varying from the
standard time of a Time Zone.
Daylight Configuration
Daylight Saving:
Enables/disables Daylight Saving mode. The default is Enable.
Daylight Saving Offset:
Set the offset to use during Daylight Saving mode. Default is +60 minutes. Enter the
time in + / - minutes.
Daylight Saving Start Time
Start Ordinal:
Set the start ordinal to use during Daylight Saving mode. Options are
first/second/third/fourth/last. Default is second. Daylight Saving time usually starts at
the same time on the same day of the week in the same month every year. Each day of
the week occurs four or five times a month. Therefore, you will be selecting the week in
which daylight saving time starts: the first, second, third, fourth or the last of the
month.
Start Month:
Set the start month to use during Daylight Saving mode. Default is March.
Start Day
:
Set the start weekday to use during Daylight Saving mode. Default is Sunday.
Start Time:
Set the start time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Daylight Saving End Time
End Ordinal:
Set the end ordinal to use during Daylight Saving mode. Select the week in which
daylight saving time ends. Options are first/second/third/fourth/last. Default is first.
End Month:
Set the end month to use during Daylight Saving mode. Default is November.
End Day:
Set the end weekday to use during Daylight Saving mode. Default is Sunday.
End Time:
Set the end time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
IP Setup > Static Routes
Routing information is used by every computer connected to a network to identify whether it is sending a data
packet directly to the firewall or passing it on to another network. The options to Delete or Edit a route after it has
been defined and added are available by using the table at the bottom of the screen.
Содержание MultiModem rCell MTCBA-H3-EN3-P1
Страница 1: ...MultiModem rCell Intelligent Wireless Router User Guide ...
Страница 14: ......
