Multitech MultiModem DSVD MT5600DSVD Скачать руководство пользователя | Manualshive

Страница: 74 / 82

background image

MultiModemDSVD User Guide

D Warranty, Service, and Technical Support

69

A Returned Materials Authorization (RMA) is not required. Return shipping charg-
es (surface) will be paid by MTS. Please include inside the shipping box a description
of the problem, a return shipping address (must have street address, not P.O. Box), a
telephone number, and if the product is out of warranty, a check or purchase order
for repair charges.

Extended two-year overnight replacement agreements are available for selected
products. Please refer to our Overnight Replacement Agreement at

http://

www.multitech.com/PROGRAMS/orc/

for details on rates and coverages. Please direct

your questions regarding technical matters, product configuration, verification that
the product is defective, etc., to our Technical Support department at 800 972-2439.

Please direct your questions regarding repair expediting, receiving, shipping, bill-
ing, etc., to our Repair Accounting department at 800 328-9717 or 763 785-3500.

Repairs for damages caused by lightning storms, water, power surges, incorrect installa-
tion, physical abuse, or user-caused damages are billed on a time-plus-materials basis.

International Products

Your distributor should contact Amex, Inc., for information about repairs for your
Multi-Tech product:

Amex, Inc.
2724 Summer Street NE
Minneapolis, MN 55413
U.S.A.

Tel: +612 331-3251
Fax: +612 331-3180

Please direct questions regarding technical matters, product configuration, verifica-
tion that the product is defective, etc., to our Technical Support department nearest
you, listed at

http://www.multitech.com/COMPANY/offices/DEFAULT.ASP

. When call-

ing the U.S., please direct questions regarding repair expediting, receiving, shipping,
billing, etc., to our Repair Accounting department at +763 785-3500.

Repairs for damages caused by lightning storms, water, power surges, incorrect
installation, physical abuse, or user-caused damages are billed on a time-plus-
materials basis.

Technical Support

Multi-Tech Systems has an excellent staff of technical support personnel available to
help you get the most out of your Multi-Tech product. If you have any questions
about the operation of this unit, please call 800 972-2439 (USA and Canada) or 763
785-3500 (international and local). Please have modem information available. You
can also contact Technical Support by e-mail at the following addresses:

U.S., Canada & Europe:

[email protected]

France:

[email protected]

India:

[email protected]

U.K.:

[email protected]

«
...
72
73
74
75
76
...
»

Содержание MultiModem DSVD MT5600DSVD



















































































Отзывы:

Нет отзывов

Похожие инструкции для MultiModem DSVD MT5600DSVD

Бренд: Ultratec Страницы: 32

Бренд: Kathrein Страницы: 16

Бренд: Kasda Страницы: 5

Бренд: Kasda Страницы: 6

Бренд: Sigrand Страницы: 42

Бренд: Moeller Страницы: 4

Бренд: Huawei Страницы: 9

Бренд: Kathrein Страницы: 16

Бренд: Topcon Страницы: 202

Бренд: Paradyne Страницы: 125

Бренд: 3Com Страницы: 12

Бренд: 4G Systems Страницы: 72

Бренд: Comnet Страницы: 5

Бренд: WiOn Страницы: 8

Бренд: Lucent Technologies Страницы: 80

Бренд: Terayon Страницы: 26

Бренд: Gigalink Страницы: 6

Бренд: Zte Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды