Multitech MultiModem DSVD MT5600DSVD, Руководство пользователя

Страница: 42 / 82

MultiModemDSVD User Guide 4 AT Commands, S-Registers, and Result Codes
37
<mod>
0
1
2
3
9
10
11
12
2
56
3
64
69
Modulation
V.21
V.22
V.22bis
V.23
V.32
V.32bis
V.34
V.90
K56flex
Bell 103
Bell212
Possible rates (bps)
1
300
1200
2400 or 1200
1200
9600 or 4800
14400, 12000, 9600, 7200, or 4800
33600, 31200, 28800, 26400, 24000, 21600,19200, 16800,
14400, 12000, 9600, 7200, 4800, or 2400
56000, 54667, 53333, 52000, 50667, 49333, 48000, 46667,
45333, 44000, 42667, 41333. 40000, 38667, 37333, 36000,
34667, 33333, 32000, 30667, 29333, or 28000
56000, 54000, 52000, 50000, 48000, 46000, 44000, 42000,
40000, 38000, 36000, 34000, or 32000
300
1200
Notes:
1. See optional <automode>, <min_RX_rate>, <max_RX_rate>, and <max_TX_rate>
subparameters.
2. Selects V.90 modulation as first priority. If a V.90 connection cannot be established,
the modem attempts K56flex, V.34, V.32bis, etc. (Default.)
3. Selects K56flex modulation as first priority. If a K56flex connection cannot be
established, the modem attempts V.90, V.34, V.32bis, etc.
x_law An optional number that specifies the PCM code type for 56K
modulation. The options are:
0 = µ-Law—used in North America and Japan (default)
1 = A-Law—used outside North America and Japan
The modem automatically selects A-Law or µ-Law if the server
sends the Conexant ID. Note that the
ATZ command restores
the x_law value from NVRAM. You can also manually select
A-Law or µ-Law using the %U command.
reserved Must not be changed from the default value of 0.
max_TX_rate An optional number that specifies the highest
rate at which the modem may establish a transmit connection.
The value is decimal coded in units of bps, e.g., 33600 specifies
the highest rate to be 33600 bps. See “Possible rates” in the
mod
table. The default is 33600, for 33600 bps.
Command: -K n MNP Extended Services
Values: n = 0, 1, or 2
Default: 0
Description: Enables or disables conversion of a V.42 LAPM connection to
an MNP 10 connection.
-K0 Disables V.42 LAPM to MNP 10 conversion.
-K1 Enables V.42 LAPM to MNP 10 conversion.
-K2 Enables V.42 LAPM to MNP 10 conversion; inhibits MNP
Extended Services initiation during V.42 LAPM answer mode
detection phase.