Multitech MultiMobile MT56128ZLX-NT, Руководство пользователя

Страница: 42 / 96

42 MultiMobile
Chapter 3—Application Program Interfaces (APIs)
11. To make connections with Multi-Link PPP, click Settings . Select Use
additional devices . Then click Add . Use the arrow to scroll down the
Device name list and select RVS ISDN Internet PPP #2 . Click OK
twice.
12. Select the Server Types tab. Use arrow to scroll down Type of Dial-Up
Server list and select PPP: Win95, Windows NT 3.5, Internet .
13. Click the appropriate Advanced options .
14. Under Allowed network protocols , select at least TCP/IP protocol for
your Internet application.
15. Click TCP/IP Settings and specify other TCP/IP parameters such as IP
address and DNS address, if necessary. Click OK when finished.
Now you are ready to communicate with your ISP via Multi-Link PPP
protocol.
Making X.75 Connections
Act as a Called Party (for incoming calls)
1. Click Start , Programs
,
RVS-COM Lite , and then CommCenter . Make
sure the following settings are correct:
Your ISDN phone number
COM port assignment
MSN/EAZ numbers
If you change any settings, remember to reboot your system.
2. Click My Computer , Control Panel , and then Modem . Select RVS
ISDN X.75 transparent . Click Properties . Make sure the COM port is
assigned correctly and no conflict exists. For example, RVS Port
(COM6 ). Click OK ; then close the window.
3. Run Windows 95 Hypertrm . Set ATS0=1 <Enter> by using the AT
command to make the ISDN TA PC Card to automatically answer the
incoming X.75 calls. Then wait for the incoming calls.