manualshive.com logo in svg

Multitech MultiFRAD FR220, Руководство пользователя, Страница: 71 / 103

Поделиться
Скачать
Multitech MultiFRAD FR220 Скачать руководство пользователя страница 71

71

Chapter 5 - Remote Configuration and Management

Web Browser Management

The MultiFRAD can be accessed, via a standard Web browser, from anywhere on the connected
Internet. In order to provide this support, the WEB Server option has to be enabled from the Others
button on the main menu which displays the Others Setup dialog box (see 

Chapter 4 - MultiFRAD

Software

). Depending on the rights of the user (read/write, or read only), it is possible to view the

current parameters and statistics of the MultiFRAD as well as configure and download setup changes
to the MultiFRAD.

You can access MultiFRAD Configuration by entering the IP address of the unit in the Address line of
your Web browser. In this example, the IP address is 192.168.2.14. The following screen appears.

Click the word Login to gain access to the MultiFRAD; the following screen appears:

Enter the User Name “supervisor” (no Password is required), then click OK. The MF200
Configuration menu is displayed.

Содержание MultiFRAD FR220








































































































Отзывы:

Нет отзывов