Multitech MultiFRAD FR220 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 103

Multitech MultiFRAD FR220 Скачать руководство пользователя страница 7

7

Chapter 1 - Introduction and Description

Related Documentation

The complete documentation package for the MultiFRAD includes this User Guide and a Quick Start
Guide. The printed version of the Quick Start Guide, shipped with the unit, provides the necessary
information for a qualified person to unpack, cable, load software, and configure the unit for proper
operation. Copies of the following guides are provided on the Manuals disk that ships with each
MultiFRAD, and you can always find the latest version of the guide at Multi-Tech’s Web site.

At the Multi-Tech Home Page (http://multitech.com), click Support, then Manuals, then MultiFRAD
and you will find the guides listed there by title.

Preview of this Guide

This User Guide describes the MultiFRAD and details how to install and configure it. The information
contained in each chapter is as follows:

Chapter 1 - Introduction and Description

Chapter 1 describes the MultiFRAD and includes front panel descriptions, back panel connectors,
and relevant technical specifications.

Chapter 2 - Installation

This chapter provides information on unpacking and cabling your MultiFRAD. Safety Warnings are
detailed, followed by the installation procedure in which each cable is connected to the MultiFRAD
and the unit is powered on.

Chapter 3 - Software Loading and Configuration

Chapter 3 details the software loading and configuration procedures. The MultiFRAD software is
windows based; numerous configuration options are available and are described in this chapter.

Chapter 4 - MultiFRAD Software

Chapter 4 describes the MultiFRAD software from an applications approach, and includes examples
of possible uses.

Chapter 5 - Remote Configuration and Management

Chapter 5 provides procedures for changing the configuration of a remote MultiFRAD. Remote
configuration enables you to change the configuration of a unit by simply connecting a PC with
communications software to a remote MultiFRAD that has communications software and a modem
connected to the command port. You can then configure the unit. Chapter 5 also describes a typical
Telnet Client configuration application and Web browser configuration.

Chapter 6 - Warranty, Service and Tech Support

Chapter 6 provides instructions on getting service for your MultiFRAD at the factory, a statement of
the limited warranty, information about our user bulletin board service, and space for recording
information about your MultiFRAD prior to calling Multi-Tech’s Technical Support personnel.

«
...
5
6
7
8
9
...
»

Содержание MultiFRAD FR220








































































































Отзывы:

Нет отзывов