manualshive.com logo in svg

Multitech MultiFRAD FR220, Руководство пользователя, Страница: 24 / 103

Поделиться
Скачать
Multitech MultiFRAD FR220 Скачать руководство пользователя страница 24

24

MultiFRAD User Guide

WAN Port Setup

23 The WAN Port Setup dialog box is displayed.

If the Trunk (RS232/V.35) connector of your MultiFRAD is connected (through a synchronous device)
to a frame relay network, click OK on the WAN Port Setup dialog box and proceed to step 24.

For a point-to-point application, select PPP/SLIP in the Device Driver group. If this is a
Synchronous mode connection, click OK and proceed to step 24.

For an Asynchronous PPP connection, choose Asynchronous mode, then 

disable Direct Connect /

Lease Line and select either Answering or Dialing. Modem Type becomes active; select your
modem type from the drop-down list. (If it is not listed, select “Manual Modem” and configure your
modem separately.) For a Dial-up (Dialing) connection, select the Modem Type 

and enter the  Dial

Number, then click OK and proceed to step 24.

Note: Be sure to set the 

other end of the PPP link for Answering.

Содержание MultiFRAD FR220








































































































Отзывы:

Нет отзывов