Multitech MultiConnect MT100EOCG, Руководство разработчика

Страница: 25 / 49

INSTALLING GATEWAYS ON THE DEVELOPER BOARD
MultiConnect® OCG-E MT100EOCG-EV3 Developer Guide 25
3. If you are installing a MultiConnect OCG-E gateway with a cellular wireless network, connect the cellular
antenna lead to the antenna connector on the MultiConnect OCG-E gateway.
4. If you are installing a MultiConnect OCG-E gateway with a GPS receiver, first connect the cellular antenna
lead to the cellular antenna connector on the gateway, then connect the GPS antenna lead to the GPS
antenna connector on the gateway.
Installing a Universal Socket Communications Device onto the Board
To install a SMI/SMC modem:
1. Align the pin of the universal socket communications device with pin 1 of the universal socket connector
on the board and press firmly. For details about the location of pin 1, see the illustration on page 20.
2. Use the optional antenna lead to connect to the antenna connector on the modem.
Installing a SIM Card onto the Board
To install a SIM card, if your model supports the use of a card:
1. Install the SIM card into the SIM card holder on the board.
Making Other Board Connections
1. If your application needs a power supply, connect the power supply lead to the power connector on the
developer board.
2. If you need to connect the debug cable for your application, connect the 3-pin connector of the debug
cable to the debug jumper next to the power switch.
3. If you need the GPIO cable in your application, connect the J1 connector on the GPIO cable to the 36-pin
connector on the developer board.