Multi-Tech Systems, Inc. MultiConnect AW User Guide
53
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le
matériel brouilleur.
This device complies with Industry Canada RSS Appliance radio exempt from licensing. The operation is
permitted for the following two conditions:
1.
the device may not cause harmful interference, and
2.
the user of the device must accept any interference suffered, even if the interference is likely to
jeopardize the operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
1.
l'appareil ne doit pas produire de brouillage, et
2.
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
REACH Statement
Registration of Substances:
After careful review of the legislation and specifically the definition of an “article” as defined in EC
Regulation 1907/2006, Title II, Chapter 1, Article 7.1(a)(b), it is our current view Multi-Tech Systems, Inc.
products would be considered as “articles”. In light of the definition in § 7.1(b) which requires
registration of an article only if it contains a regulated substance that “is intended to be released under
normal or reasonable foreseeable conditions of use,” our analysis is that Multi-Tech Systems, Inc.
products constitute nonregisterable articles for their intended and anticipated use.
Substances of Very High Concern (SVHC):
Per the candidate list of Substances of Very high Concern (SVHC) published October 28, 2008 we have
reviewed these substances and certify the Multi-Tech Systems, Inc. products are compliant per the EU
“REACH” requirements of less than 0.1% (w/w) for each substance.
If new SVHC candidates are published by the European Chemicals Agency, and relevant substances have
been confirmed, that exceeds greater than 0.1% (w/w), Multi-Tech Systems, Inc. will provide updated
compliance status.
Multi-Tech Systems, Inc. also declares it has been duly diligent in ensuring that the products supplied are
compliant through a formalized process which includes collection and validation of materials
declarations and selective materials analysis where appropriate. This data is controlled as a part of a
formal quality system and will be made available upon request.
