Chapter 4 – Device Configuration
Multi-Tech Systems, Inc. MultiConnect AW User Guide
35
Option
Default
Selection
A) Menu Inactivity Timer
30 (sec)
This is a time limit on how long a menu will display with no
activity. Time is displayed in seconds. Zero seconds disables the
timer.
B) No Signal Reset Timer
*
300 (sec)
The MultiConnect resets itself if it cannot find a signal strong
enough to establish a wireless connection. Time is displayed in
seconds. Zero seconds disables timer.
* MT100A2W-G only.
Setup Email
The email function sends the network assigned public IP address and the user assigned local port
number to the recipient’s email address. This email is used for inbound only. The IP address and port
number are displayed in “My Public ID” after the last option in the Cellular Settings menu and above @)
Main Menu.
Option
Default Selection
A) SMTP UN
This is the email server’s username.
B) SMTP PW
This is the email server’s password.
C) SMTP PORT
This is the port that the email server listens on. The default port number is 25.
D) SMTP Authentication If your email account requires authentication, the MultiConnect will send the
username and password to the mail server. The default is to have
authentication enabled.
E) SMTP Server
This is the mail server’s IP address/name.
F) Domain
This is the mail server’s domain.
G) Sender’s Name
This shows who sent the email.
H) Sender’s Address
This shows where the email came from.
I) Recipient’s Address
This is the IP address where the email is being sent. If there is no recipient
address, the email service is disabled.
