33
Chapter 3 - AT Commands, S-Registers and Result Codes
AT Command Summary
Command:
AT
Attention Code
Values:
n/a
Description:
The attention code precedes all command lines except
A/
,
A:
, and escape sequences.
Command:
ENTER Key
Values:
n/a
Description:
Press the E
NTER
(R
ETURN
) key to execute most commands.
Command:
A
Answer
Values:
n/a
Description:
Answer call before final ring.
Command:
A/
Repeat Last Command
Values:
n/a
Description:
Repeat the last command string. Do not precede this command with
AT
. Do not press E
NTER
to
execute.
Command:
B
n
Communication Standard Setting
Values:
n
= 03, 15, 16
Default:
1 and 16
Description: B0
Select ITU-T V.22 mode when modem is at 1200 bps.
B1
Select Bell 212A when modem is at 1200 bps.
B2
Deselect V.23 reverse channel (same as
B3
).
B3
Deselect V.23 reverse channel (same as
B2
).
B15 Select V.21 when the modem is at 300 bps.
B16 Select Bell 103J when the modem is at 300 bps.
Command:
C
n
Carrier Control
Values:
n =
1
Default:
1
Description: C0
Transmit carrier always off. (Not supported.)
C1
Normal transmit carrier switching (included for backward compatibility with some software).
Command:
D
s
Dial
Values:
s
= dial string (phone number and dial modifiers)
Default:
none
Description:
Dial telephone number
s
, where
s
may up to 40 characters long and include the 09, *, #, A, B,
C, and D characters, and the
L
,
P
,
T
,
V
,
W
,
S
, comma (
,
), semicolon (
;
),
!
,
@
,
^
and
$
dial
string modifiers.
Dial string modifiers:
L
Redial last number. (Must be placed immediately after
ATD
.)
P
Pulse-dial following numbers in command.
T
Tone-dial following numbers in command (default).
V
Switch to speakerphone mode and dial the following number. Use
ATH
command to hang up.
W
Wait for a new dial tone before continuing to dial. (
X2
,
X4
,
X5
,
X6
, or
X7
must be selected.)
,
Pause during dialing for time set in register S8.
;
Return to command mode after dialing. (Place at end of dial string.)
!
Hook flash. Causes the modem to go on-hook for one-half second, then off-hook again.
@
Wait for quiet answer. Causes modem to wait for a ringback, then 5 seconds of silence, be-
fore processing next part of command. If silence is not detected, the modem returns a NO
Содержание MT5634MU
