Multitech MT5634MU, Руководство пользователя, Страница: 28 / 80

28
MultiMobile USB User Guide
From Windows ME
1. Go to Start | Settings | Control Panel
2. Double-click the Modems icon to open the
Modems Properties screen.
3. In the General tab a list of modems appears. In this list, highlight the old modem.
4. Click Remove , and then click Close .
5. The next time you dial a HyperTerminal connection, it will select your new modem and ask you to
confirm the selection.
From Windows 98/95
1. Click Start | Settings | Control Panel .
2. Double-click the Modems icon to open the Modems Properties sheet.
3. In the list box, select the old modem.
4. Click
Remove , then click Close .
5. The next time you dial a HyperTerminal connection, it will select your new modem and ask you to
confirm the selection.
Step 3: Configuring the Modem
for Your Country
Different countries have different requirements for how modems must function. Therefore, before you
use the modem, you must configure it to match the defaults of the country in which you are using it.
You can configure the MT5634MU either manually using AT commands or with the Global Wizard. Both
methods are described below.
Using the Global Wizard Utility
The Global Wizard configuration utility is recommended for computers running Windows 95/98/ME/
2000. The Global Wizard can configure your modem for a specific country with just a few mouse
clicks.
1. Insert the MT5634MU Installation CD into the CD-ROM drive. The
Autorun dialog box appears.
2. Click Initial Setup and Country Selection . The Global Wizard dialog box appears. Click Next .
3. View the Global Wizard as it searches for your modem and identifies it. Click Next .
4. Select the country in which the modem will be used, and then click Next .
5. Review your choice of country. If it is correct, click Next to configure the modem.
6. When Global Wizard announces that the parameters have been set, click Finish to exit.
Using AT Commands
If you are comfortable using AT commands, you can configure your modem using AT commands. You
must enter these commands in your communication program’s terminal window.
To configure the modem for a specific country, execute the following AT commands:
1. Type AT%T19,0,nn (where nn represents the country code). Press Enter .
2. The modem will respond “OK.”
3. Type
AT&F&W (this saves changes). Press Enter .