Multitech MT5600DSVD2, Руководство пользователя

Страница: 35 / 94

4 AT Commands, S-Registers, and Result Codes
27
AT Command Summary
Command: AT Attention Code
Values: n/a
Description: The attention code precedes all command lines except
A/
and
the escape sequence.
Command: ENTER Key
Values: n/a
Description: Press the E
NTER
or R
ETURN
key to execute most commands.
Command: A Answer
Values: n/a
Description: Answer an incoming call before the final ring.
Command:
A/ Repeat Last Command
Values: n/a
Description: Repeat the last command string. Do not precede this command
with
AT . Do not press E
NTER
to execute.
Command:
B
n
Communication Standard Setting
Values: n = 0 or 1
Default: 1
Description: B0 Select ITU-T V.22 mode when the modem is at 300 or 1200 bps.
B1 Select Bell 212A when the modem is at 300 or 1200 bps.
Command: C n Carrier Control
Values: n = 1
Default: 1
Description: C0 Transmit carrier always off. (Not supported.)
C1 Normal transmit carrier switching (included for backward
compatibility with some software).
Command: D s Dial
Values: s = dial string (phone number and dial modifiers)
Default: none
Description: Dial telephone number s , where s may up to 40 characters long
and include the following dial string modifiers. Spaces, paren-
theses, and hyphens are ignored.
0–9 Digits 0 through 9
* The “star” digit (tone dialing only)
# The “pound” digit (tone dialing only)
A–D A, B, C, and D tone digits. Country specific; some countries
may prohibit these digits.
L Redial last number. (Must be placed immediately after
ATD .)
P
Select pulse-dialing until a
T
is encountered.
Affects current
and subsequent dialing.
T Select tone-dialing until a P is encountered.
Affects current
and subsequent dialing.