Multitech MT5600DSVD2, Руководство пользователя

Страница: 14 / 94

MultiModemDSVD User Guide
6
Introduction
We know you are eager to get your MultiModemDSVD2 up and running, so we’ll
show you step-by-step how to set it up, check it out, and make your first calls.
What You Will Need
Before starting, please make sure you have everything you need:
We supply
4
An MT5600DSVD2 data/fax/voice modem
4
A DC power supply module
4
A set of four plastic feet
4
A modular telephone cable
4
A CD containing communication software
4
A printed Quick Start Guide
4
This User Guide on disk
4
An installation disk
You supply
4
A computer with an unused serial port
4
A shielded RS-232 serial cable with a male DB-25 connector on one end and a
connector to match your computer’s serial port on the other end
4
A nearby AC power outlet
4
A nearby telephone line jack
4
A telephone handset
If you are new to computers, see Chapter 3, “Features,” for more information about
the required equipment.
Safety Warnings
• Use this product only with UL- and CUL-listed computers.
• To reduce the risk of fire, use only 26 AWG or larger telephone wiring.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is specifically de-
signed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm;
there is a risk of electrical shock from lightning.
• Do not use a telephone in the vicinity of a gas leak.