Multitech etherFAX A2E, Руководство пользователя

Страница: 11 / 17

CONFIGURING THE DEVICE
etherFAX
®
A2E MT200A2E-EF User Guide 11
Field Description
Send Enables the device for send fax functionality.
Receive Enables the device for receive fax functionality.
Skip Lines Defines number of raster lines to remove from top of a page. Use this to drop the
analog fax device's header and replace it with an etherFAX supplied header.
Reporting Sets transmission report type. Reports will be printed by the local analog fax
device. Options are:
■
Errors only — Sends report if transmission fails.
■ Always — Sends a report for every transmission.
■
Never — Never sends a transmission report. You can view failed
transmission in the etherFAX Client Portal, under Reporting.
Important: Disable transmission reports on the analog fax device as the
etherFAX A2E generates these reports.
Caller ID Configures the caller ID for etherFax A2E to use when sending a fax.
Note: Configure Caller ID as a valid 10 digit toll number. Failure to do so
results in higher transmission failure rates.
Poll Interval Integer value, in seconds, that the etherFAX A2E polls the etherFAX service for
inbound faxes.
Advanced Configuration
To open this form, click Advanced Configuration on the lower left corner of the System Settings form.
Setting Description
Proxy Server IP or hostname address to use for connection if proxy server is required.
User User name to supply if proxy server is required.
Password Password to supply if proxy server is required.