REGULATORY & SAFETY INFORMATION
Conduit
®
300 Series IoT Programmable Gateway MTCDT3AC-L4G1/-EN Hardware Guide
27
Chapter 5 – Regulatory & Safety Information
47 CFR Part 15 Regulation Class A Devices
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Interference Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired
operation.
FCC Notice
The MultiTech Conduit is an open embedded development product. Configurations of this product may optionally
contain a sub GHz radio technology which MultiTech has certified for compliance with US and Foreign compliance
bodies including FCC, R&TTE and others. (e.g. FCC 15.247:2015 & IC RSS-210:2010).
MTDOT-x products are open development based products that contain a sub GHz radio technology. MultiTech has
certified for compliance with US and Foreign compliance bodies including FCC, R&TTE and others. (e.g. FCC
15.247:2015 & IC RSS-210:2010)
The MTAC-LORA is open development based product that contains a sub GHz radio technology. MultiTech has
certified for compliance with US and Foreign compliance bodies including FCC, R&TTE and others. (e.g. FCC
15.247:2015 & IC RSS-210:2010)
xDot products are open development based products that contain a sub ghz radio technology. MultiTech has
certified for compliance with US and Foreign compliance bodies including FCC, R&TTE and others. (e.g. FCC
15.247:2015 & IC RSS 247:2015)
MultiTech provides software code meant to operate the radio to a level that maintains compliance with the
operating modes under which these radio devices were certified. To ensure this level of compliance, the software
code is provided in binary form only. Users are prohibited from making any changes that affect the operation of
