background image

PAGE 34 — WBH16/WBH16E POWER BUGGY (S/N 110401 & UP) • OPERATION AND PARTSMANUAL — REV. #1 (06/18/15) 

EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and 

remarks used in the Parts section of this manual. Use the 

help numbers found on the back page of the manual if there 

are any questions. 

SAMPLE PARTS LIST

NO.  PART NO.  PART NAME 

QTY.  REMARKS

1 12345  BOLT .....................1 .....INCLUDES ITEMS W/%

2%   

WASHER, 1/4 IN. ..........NOT SOLD SEPARATELY

2%  12347 

WASHER, 3/8 IN. ..1 .....MQ-45T ONLY

3 12348  HOSE ..................A/R ...MAKE LOCALLY

4 12349  BEARING ..............1 .....S/N 2345B AND ABOVE

NO. Column

Unique Symbols 

— All items with same unique symbol 

(@, #, +, %, or >) in the number column belong to the 

same assembly or kit, which is indicated by a note in the 

“Remarks” column. 

Duplicate Item Numbers 

— Duplicate numbers indicate 

multiple part numbers, which are in effect for the same 

general item, such as different size saw blade guards in 

use or a part that has been updated on newer versions 

of the same machine. 

PART NO. Column

Numbers Used 

— Part numbers can be indicated by a 

number, a blank entry, or TBD. 
TBD (To Be Determined) is generally used to show a 

part that has not been assigned a formal part number 

at the time of publication.
A blank entry generally indicates that the item is not sold 

separately or is not sold by Multiquip. Other entries will 

be clarifi ed in the “Remarks” Column. 

 NOTICE

The contents and part numbers listed in the parts 

section are subject to change 

without notice

. Multiquip 

does not guarantee the availability of the parts listed.

 NOTICE

When ordering a part that has more than one item 

number listed, check the remarks column for help in 

determining the proper part to order. 

QTY. Column

Numbers Used 

— Item quantity can be indicated by a 

number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other 

parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold 

separately. Other entries will be clarifi ed in the “Remarks” 

Column. 

REMARKS Column

Some of the most common notes found in the “Remarks” 

Column are listed below. Other additional notes needed 

to describe the item can also be shown.

Assembly/Kit 

— All items on the parts list with the 

same unique symbol will be included when this item is 

purchased.
Indicated by:

“INCLUDES ITEMS W/(unique symbol)” 

Serial Number Break 

— Used to list an effective serial 

number range where a particular part is used.
Indicated by: 

“S/N XXXXX AND BELOW”

“S/N XXXX AND ABOVE”

“S/N XXXX TO S/N XXX”

Specifi c Model Number Use 

— Indicates that the part 

is used only with the specifi c model number or model 

number variant listed. It can also be used to show a 

part is NOT used on a specifi c model or model number 

variant. 
Indicated by:

“XXXXX ONLY”

“NOT USED ON XXXX”

“Make/Obtain Locally” 

— Indicates that the part can 

be purchased at any hardware shop or made out of 

available items. Examples include battery cables, shims, 

and certain washers and nuts.

“Not Sold Separately” 

— Indicates that an item cannot 

be purchased as a separate item and is either part of an 

assembly/kit that can be purchased, or is not available 

for sale through Multiquip.

Содержание Whiteman series





































































Отзывы: