MC94SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (06/22/22) — PAGE 13
GENERAL INFORMATION
APPLICATION
This mixer is
only
intended for the production of
concrete
.
The mixer must be used for its intended purpose and is
not suitable for the mixing of
flammable
or
explosive
substances. The mixer
must not be used
in an explosive
atmosphere. Use Table 4 (Mixing Hints) as a guide when
mixing concrete for various applications.
POWER PLANT
This mixer is powered by a Kohler CH395 4-stroke, air-
cooled, single-cylinder gasoline engine Refer to Table 3
for specific engine data information.
HARDWARE
Check all hardware on the mixer before starting. Periodically
inspect all hardware. Loose hardware can contribute
to early component failure and poor performance. Use
Table 5 as general guideline when the torqueing of mixer
hardware is required. Remember to keep all mixer hardware
components tight.
Table 5. Hardware Torque Recommendations
Hardware Diameter
Torque (ft-lbs)
5/16-inch x 18
14
3/8-inch x 16
24
3/8-inch x 24
37
1/2-inch x 13
39
1/2-inch x 13 (Grade 8)
90
ENGINE MAINTENANCE
For basic engine maintenance, refer to the engine
maintenance section in this manual. For more detailed
engine maintenance, refer to the Kohler Engine Owner's
manual furnished with the engine.
OPTIONAL TOW BARS
This mixer can be configured for use with various types of
tow bars (ball, loop and pin). Reference Figure 2. Contact
MQ sales department for the desired tow bar.
Figure 2. Optional Tow Bars
HBC-1
HLC-1
HPC-1
OPTIONAL TOWING BARS
Discount-Equipment.com