PAGE 6 — INSTALLATION OPERATION MANUAL — REV. #0 (09/09/09)
CARE AND HANDLING
Transmitter:
Clean transmitter gently with a damp cloth.
DO NOT
immerse transmitter
in water, or spray with hose.
DO NOT
store outside.
DO NOT
drop transmitter or otherwise subject transmitter to physical
shock.
DO NOT
expose transmitter to extreme temperatures.
DO NOT
open transmitter enclosure. Transmitter contains no serviceable
parts.
Receiver:
Remove receiver from machine prior to welding on machine
DO NOT
paint electrical connector.
Use only factory provided antenna and cabling.
DO NOT
open receiver enclosure except to change radio channel or make
adjustments to factory settings.
Use transmitter to test functions.
DO NOT
apply voltage to circuit board
directly.
