DIS185SSI4F AIR COMPRESSOR — HOSE REEL INSTALLATION INSTRUCTIONS P/N EE60468 — REV. #0 (04/16/18) — PAGE 7
BUMPER STOP INSTALLATION
1.
On the fuel tank side
of the air compressor, secure
the bumper stop (P/N 59267) to the frame where
the rear marker light was removed earlier with
two M4-0.7 × 12 mm screws (P/N 28922-083). See
Figure 12.
Figure 12. Bumper Stop Installation
2. If installing the dual hose reel kit (P/N MQPDUALREEL50),
repeat step #1 on the battery side of the air compressor.
M4-0.7 × 12 mm
SCREW
P/N 28922-083
BUMPER STOP
P/N 59267
PIVOT BASE INSTALLATION
1.
On the fuel tank side
of the air compressor, drill a
3/4-inch hole into the side of the rear frame as shown
in Figure 13.
Figure 13. Drill Wiring Harness Hole
DRILL HOLE
3/4" DIAMETER
1-3/4"
2-1/2"
REAR BUMPER
P/N 59269