MULTIQUIP DCA-600SSV, Руководство по эксплуатации и запасным частям

Страница: 43 / 108

DCA-600SSV — OPERATION AND PARTS MANUAL — REV. #0 (07/13/09) — PAGE 43
DCA-600SSV — GENERATOR SHUT-DOWN PROCEDURE
Normal Shutdown Procedure
To shutdown the generator use the following procedure:
1. Place both the GFCI and AUX circuit breakers as shown
in Figure 42 to the OFF position.
2. Place the engine speed switch (Figure 65) in the
“
LOW
” (down) position.
Figure 66. MPEC Control Switch (Off/Reset)
5. Press the main circuit breaker “ OFF ” switch (Figure 40).
6. Verify that the main circuit breaker “ OFF ” lamp (Figure 41)
is lit ( ON ).
7. Verify that the all status LED on the MPEC display
are OFF (not lit).
8. Remove all loads from the generator.
9. Inspect entire generator for any damage or loosening of
components that may have occured during operation.
3. Let the engine cool by running it at low speed for 3-5
minutes with no load applied.
4. Place the
MPEC Control Switch
(Figure 66) in the
OFF/RESET position.
Figure 65. Engine Speed Switch (Low)
NEVER stop the engine suddenly except in an emergency.
WARNING - SHUTTING DOWN THE GENERATOR
Emergency Shutdown Procedure
1. PUSH inward the emergency stop button located on the
engine operating panel (Figure 67) to turn off the
generator in the event of an emergency.
Figure 67. Emergency Stop Button
EMERGENCY
STOP
P U SH
TO STOP