Multimax DI/DO configuration
and Testing Documents
Page 8 / 10
1. Connection diagram of DI
Connect slide switch to pin In1\In2 and V-. For testing, all we need to do is to change the electric level of pin
In1 and In2 (DI).
2. Connection diagram of DO
12VDC power supply --> 10K resistor --> LED --> pin Out1\ Out2.
Pin GND connect to V-.
Configuration
2.1Configure Phone Book
In the following test, if DI is triggered, need to send out a trigger SMS to specific Phone. No, that is
what we need to configure this tab “Phone Book”.
1. Open Multimax
’s Web GUI, go to “Configuration” --> “Phone Book” --> click “Add” to add phone
number in tab “Phone No.” and enter specific description at tab “Description”. For example, when
you enter Saroj
’s Phone No. , you can enter “Saroj Testing” in “Description” --> click “Apply” at the
right button of the page.
2.
Go to another tab
“Configuration” --> “Phone Book” --> “Phone Group” --> click “Add”, in the
new page, assign different Phone no. to different group and set group name --> click
“Apply”.
