Multimax DI/DO configuration
and Testing Documents
Page 7 / 10
Software requirement:
System requirement:
Windows 7 (32/64), Windows V ista (32/64), Windows 2008 (32/64), Windows 2003 (32/64),
Windows 2000, Windows
XP (32/64) .
1.4 Connection Diagram
Follow the connection diagram below, refer to Parts Used, and connect two 10K resistors, two
LEDs, two slide switches and serial electric line to the connector terminal. We can connect
“12VDC”to power input (which standard powerinput is 12VDC), and then use a serial electric line
connect “GND” to “V-” (GND of 12VDC power).
Note
: please check the connector interface of Multimax you can find out “
V-
” easily at one of the pin of power
input connector.
Figure 1.2 DI Connection
Figure 1.1 DO Connection
