Multimax DI/DO configuration
and Testing Documents
Page 11 / 10
2.3 Configure Digital Outputs
1.
Follow above section 2.2, go to next tab
“DO”--> “DO_1” --> click to “Enable” to
enable
“DO Configuration”
--> In tab
“Alarm Source”, click to enable “SMS Control”
“Status When Power on”, enter “10” in tab “Keep On (s)” if you want Digital output
to be on only 10 sec. If you leave 0, the output will be on until you turn off the
Output.
--> Click “Apply” at the right button of the page.
