Multikomplex SLT973, Инструкция по установке, использованию и обслуживанию

Страница: 48 / 50

48
49
Careful maintenance ensures smooth operation
and long-lasting performance.
Special care must be taken with the grease filter:
To access the filter, proceed as follows:
In the Chapter → OPENING THE PANEL.
Remove the grease filter using the special han-
dle.
To replace the grease filter after cleaning, fulfil
the same operation in reverse order.
To remove the carbon filter, if installed, follow the
same steps as the grease filter.
The carbon filter is located immediately above
the grease filter.
Warm water and neutral detergents are recom-
mended to clean up the appliance, while abrasive
products should be avoided.
If the power cord is damaged, a qualified person
must replace it.
It is possible to open the grease filter cover panel
pulling it as shown in fig. 1.
The panel is fixed with three magnets, there are
two safety cables to be released to remove the
panel from the product.
For proper operation, it is recommended to install
the product at a maximum distance, from the floor
level, of 2000 - 2100 mm.
MAINTENANCE