If the product is not provided with a plug or if the
plug is not easily accessible, it will be necessary
to install a thermomagnetic circuit breaker switch
on the electricity line between the product and
the electrical system to which it is connected to
that has a contact aperture of the poles of at least
3mm.
EN
ELECTRICAL
CONNECTION OF
THE PRODUCT
Place the metal box containing the elec-
tronic components at a distance of no less
than 65 cm from gas-operated cook tops or
in any case, 65 cm from the suctioning sur-
face of the cooker hood.
WARNING
We recommend installing the metal box
containing the electronic components at le-
ast 10 cm above floor level and at a suitable
distance from all heat sources (e.g. oven
sides or cook top).
NOTE
This appliance is fitted with an H05 VVF 3
conductor, 0.75 mm2 (neutral, phase, and
ground) power cord.
This can be connected up to a 220 - 240 V
mono-phase electrical network through a
CEI 60083 approved power socket, which
must remain accessible after installation,
in compliance with installation regulations.
We decline any responsibility in case of
accidents caused by a lack of ground con-
nection or incorrect ground connection.
The appliance must be fed through a dif-
ferential protection device (RCD), with a
nominal residual current not exceeding
30mA. If the power cord is damaged, call
the after-sales service to avoid any risk.
CAUTION
Once the installation is completed it is necessary
to give electricity supply to the Downdraft pres-
sing the red button placed above the metallic box
with the wiring boards inside.
Connecting the product to the mains elec-
tricity must be carried out by technically
qualified and specialised personnel.
The product must be connected to an
electrical system correctly designed and
installed.
The electrical system must comply with
VDE0100 standard.
WARNING
If the product shows signs of a fault, di-
sconnect the appliance or remove the fuse
corresponding to the disconnection line of
the appliance.
DANGER
15
S-DDH3
Содержание S-DDH3
