Page <7>
V1.0
14/06/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Command Set
Command code & Return Value
Description
Example
Input Command: SOUT<Output>[CR]
Return Value: [OK][CR]
Set Output on/off
Set Output off: <Output>=0
Set Output on: <Output>=1
Input Command: SOUT0[CR]
Return Value: [OK][CR]
Meaning: Set Output off
Input Command: GOUT [CR]
Return Value: <Output> [CR][OK][CR]
Get Output Status
Output off: <Output>=0
Output on: <Output> =1
Input Command: GOUT[CR]
Return Value: 0[CR][OK][CR]
Meaning: Output is off
Input Command: SETD
<VOLTAGE><CURRENT>[CR]
Return Value: [OK][CR]
SET Voltage and Current
<voltage> =0000~3640
<Current> =0000~5100
Input Command: SETD05001000[CR]
Return Value: [OK][CR]
Meaning: Voltage 5.00V Current 1.000A
Input Command: GETD [CR]
Return Value: <Voltage><;><Current><;>
<CV/CC Mode><;>[CR][OK][CR]
Get display Volt & display
Curr & CV/CC mode
<voltage> =0~9999
<Current> =0~9999
<CV mode> =0 CV Mode
<CC mode> =0 CC Mode
Input Command: GETD [CR]
Return Value:
500;1000;0;[CR][OK][CR]
Meaning: The Display value is 5.00V and
1.000A
It is CV mode
Input Command: GETS [CR]
Return Value: <Voltage><;><Current><;>[CR]
[OK][CR]
Get Setting Volt & Curr
<voltage> =0~3640
<current> =0~5100
Input Command: GETS[CR]
Return Value: 500;1000;[CR][OK][CR]
Meaning: The Memory setting voltage
value is 5.00V and Current is 1.000A
Input Command: VOLT<Voltage>[CR]
Return Value: [OK][CR]
Set output voltage
Input Command: VOLT 1000[CR]
Return Value: [OK][CR]
Meaning: Set voltage value is 10.00V
Input Command: CURR<Current>[CR]
Return Value: [OK][CR]
Set output current
Input Command: CURR1000[CR]
Return Value: [OK][CR]
Meaning: Set Current value is 1.000A
Input Command: GMOD [CR]
Return Value: <MODE>[CR][OK][CR]
Get MODE
<MODE>=NTP????
Input Command: GMOD[CR]
Return Value: NTP5521[CR][OK][CR]
Meaning: Mode is NTP5521
Input Command: GVSH [CR]
Return Value: <Voltage>[CR][OK][CR]
Get voltage set high limit
<voltage>=????
Input Command: GVSH [CR]
Return Value: 3600 [CR][OK][CR]
Meaning: voltage set high limit is 36.00V
Input Command: GVSL [CR]
Return Value: <Voltage>[CR][OK][CR]
Get voltage set low limit
<voltage>=???
Input Command: GVSL [CR]
Return Value: 100 [CR][OK][CR]
Meaning: Voltage set low limit is 1.00V
Operation Environmental Condition
10-80% R.H.
Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C.
Altitude up to 2000m
Installation category: CAT 2
Pollution degree: 2
Mains supply voltage fluctuation up to ±10% of the normal voltage
