multicomp pro MP700499, Руководство пользователя

Страница: 9 / 51

9
Do not test the terminal-to-ground voltage over 70 VDC.
Do not test AC voltage.
Be sure to connect the test lead correctly.
Wear gloves of rubber or similar materials during measurement.
Ensure sufficient ventilation when testing batteries in the measurement room to
prevent explosions. Sparks may occur when the test leads are connected to batteries,
which can ignite any accumulated inflammable gases such as hydrogen.
Handling leads and cables
When using the instrument, use only the test line 9363-B or test leads specified by our
company.
To avoid damaging the cables, do not bend or pull the base of cables and the leads.
The ends of pin type leads are sharp. Be careful to avoid injury.
To avoid damage to the test leads, when plug/pull the test line, don’t hold the cable
but connector.