multicomp pro MP700499, Руководство пользователя

Страница: 37 / 51

37
1. If the data is stored at a different address than the memory address shown, use the
/
key to change the address cell number. This can be done at any time as long as storage is enabled.
2.
Retain the measurement values by pressing the [HOLD] key.
3. Using the key
[MEMO] to store the measurement values. The measurement values are stored in
the cell with the selected memory number.
4. After the data is stored, the next available memory number is displayed.
5.3 Canceling the Memory Function
1. Press the [SET] key on the test page. Switch to the system Settings interface.
2. Press the direction key to move the cursor to automatic storage.
3. Press the
[ENTER] key to select ON or OFF to set the automatic storage function, and press the
left and right keys to switch OFF. Press [ENTER] again to turn off automatic storage. Press [ESC] to
return to the measurement interface.
5.4 Reading Out Stored Data
The stored measurement values are displayed after they are read out.
1. Press the
[FILE] key on the test page. Switch to the file reading interface.