MULTICOM BMC-3G, Руководство по установке

Страница: 2 / 17

3 Introduction
Contacting us:
For help with your Multicom, please
contact Multicom Customer Service,
email: contact@suretek.com.au
online: www.suretek.com.au
phone: 1300 65 44 33 ( +61 2 8787 9865)
Multicom ® is a registered trademark.
Copyright © 2017 Multicom Systems.
All rights reserved.
Introduction
There are 14 steps in this Multicom BMC-3G Installation
Guide. Please ensure you complete each step in order.
BMC-3G
(steps 1 - 3)
Connect
the BMC-3G
communicator to
your Bosch alarm
panel.
Contents
Introduction........................................................3
Connect the Multicom BMC-3G......................4
Arm/Disarm for AlarmLINK................................7
Test Signal Strength............................................10
Install TechTools.................................................11
Program the Multicom......................................14
Warranty Statement..........................................22
Copyright Notice & Disclaimers......................26
Board Overview................................................27
Drilling Template...............................................28
Resources..........................................................32
TechTools
(steps 7 - 14)
Install TechTools
and program the
Multicom. Add
relays and techs.
Use TechTools to
add customers
to AlarmLINK and
your logo.
AlarmLINK
(steps 4 - 6)
Setup arm/disarm
to give customers
control of the
Multicom via the
AlarmLINK app.
Scan QR
codes
to access
tutorials