Sequential Recordings
After pressing the button “Scan” the receiver scans for available headstages in range. Then the user
is able to select the desired headstage. Click on one of the headstages in the "Available Headstages"
window and press the button "Select".
After recording from the first headstage, deselect the headstage by clicking the button "Deselect".
Now you can choose a different headstage and repeat the process. For sequential recording, the full
sampling rate for the respective headstage type is available.
Parallel Recordings
Operating multiple Wireless2100-Headstages in parallel with one computer is still under development.
It will be possible to run two receivers connected to one interface board, each recording from up to four
headstages in simultaneously.
To control the different recordings independently, start one instances of MC_Rack for each headstage.
In “Data Source Setup” assign the Wireless2100 receivers via serial number to the instances of MC_Rack.
With a maximum of eight instances, it is possible to select a different headstage in each MC_Rack
instance and control the recording independently. Already selected headstages become invisible
for other scanning receivers. When doing parallel recordings, the sampling rate is limited to 2 kHz.
Содержание Wireless2100-System
Страница 1: ...Wireless2100 System Manual ...
Страница 33: ...Datasheets ...