Multi-Tech MT5600BA Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 118

background image

MultiModemII User Guide

84

Appendix A: Regulatory Compliance

FCC Part 68 Telecom

1. This equipment complies with part 68 of the Federal Communications Commis-

sion Rules. On the outside surface of this equipment is a label that contains,
among other information, the FCC registration number. This information must
be provided to the telephone company.

2. The suitable USOC jack (Universal Service Order Code connecting arrangement)

for this equipment is shown below. If applicable, the facility interface codes
(FIC) and service order codes (SOC) are shown.

3. An FCC-compliant telephone cord and modular plug is provided with this

equipment. This equipment is designed to be connected to the telephone net-
work or premises wiring using a compatible modular jack that is Part 68 compli-
ant. See installation instructions for details.

4. The ringer equivalence number (REN) is used to determine the number of devic-

es that may be connected to the telephone line. Excessive RENs on the telephone
line may result in the device not ringing in response to an incoming call. In
most, but not all, areas the sum of the RENs should not exceed 5.0. To be certain
of the nuber of devices that may be connected to the line, as determined by the
total RENs, contact the local telephone company.

5. If this equipment causes harm to the telephone network, the telephone company

will notify you in advance that temporary discontinuance of service may be re-
quired. But if advance notice is not practical, the telephone company will notify
you as soon as possible. Also, you will be advised of your right to file a com-
plaint with the FCC if you believe it is necessary.

6. The telephone company may make changes in its facilities, equipment, opera-

tions, or procedures that could affect the operation of the equipment. If this hap-
pens, the telephone company will provide advance notice in order for you to
make necessary modifications in order to maintain uninterrupted service.

7. If trouble is experienced with this equipment (the model of which is indicated

below) please contact Multi-Tech Systems, Inc. at the address shown below for
details of how to have repairs made. If the trouble is causing harm to the tele-
phone network, the telephone company may request you remove the equipment
from the network until the problem is resolved.

8. No repairs are to be made by you. Repairs are to be made only by Multi-Tech

Systems or its licensees. Unauthorized repairs void registration and warranty.

9. This equipment should not be used on party lines or coin lines.

10. If so required, this equipment is hearing-aid compatible.

«
...
90
91
92
93
94
...
»

Содержание MT5600BA























































































































Отзывы:

Нет отзывов

Похожие инструкции для MT5600BA

MO128 - QUICK_START_GUIDE

Бренд: SWEEX Страницы: 9

Бренд: SWEEX Страницы: 3

Бренд: BandLuxe Страницы: 23

Бренд: VisionTek Страницы: 6

Бренд: US Robotics Страницы: 245

Бренд: Belkin Страницы: 2

Бренд: Zoom Страницы: 4

Бренд: Zoom Страницы: 21

Бренд: Zoom Страницы: 22

Бренд: Zoom Страницы: 32

326X V.32bis Series

Бренд: Raymar Страницы: 213

Бренд: ICPDAS Страницы: 55

Бренд: ICPDAS Страницы: 8

Бренд: Coster Страницы: 4

Бренд: Zte Страницы: 2

Бренд: REPEATIT Страницы: 5

Бренд: Abocom Страницы: 11

Fibre to the Curb

Бренд: NBN Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды