MULTI-MOVER XL75
20
8 FAILURES
When removing a failure, ALWAYS switch off the Multi-Mover XL75 and remove the ignition key.
If a defect is established at the Multi-Mover XL75, do not use it until the repair has been com-
pleted.
Failure
Solution
A
The Multi-Mover XL75 does not drive.
1 Emergency stop has been pressed
1 Pull out
2 Battery empty
2 Charge battery
3 Battery clamps make poor contact
3 Clean, attach again
4 Direction switch defective
4 Replace switch
5 Other causes.
5 Consult your dealer
B
The Multi-Mover XL75 functions occasionally.
1 Loose wiring
1 Check wiring
2 Dirty or worn collector motor
2 Clean, or have it overhauled, or replace it
3 Relay does not come "in"
properly due to contamination or defect
3 Clean or replace
C
Speed cannot be controlled (properly), or it drives at high speed immediately.
1 Speed controller defective
1 Replace
2 Relay defective
2 Replace
In case of a failure not mentioned in the list above, please contact your dealer.
Note: In the warranty period, it is absolutely prohibited to perform repairs, changes and
modifications or anything like that to the Multi-Mover XL75, the warranty will become invalid au-
tomatically.
9 PARTS (exploded view is available on request)
Please mention serial number
001 Battery (state amperage)
010 Transaxle drive wheels
002 Drive motor
011 Battery plug
012 Female plug for battery plug
004 Relay
013 Fuses, set
005 Speed switch
014 Main fuse
006 Ignition lock
020 Symbol stickers
007 Reverse switch forward - reverse
008 Drive wheel
009 Swivel wheel
