background image

      

 

 

 
 
 
              

 

 

MULTI-MOVER XL75

 

 

 

 

 

 

 

 

 

 

 

 

 

16

 

 

 

 

 

 

Therefore, we would like to draw your attention to the following: 

 

Excessive load of the battery

 

If the batteries are loaded excessively, this will strongly reduce the life span. This means that you will 

have to adapt the load. 

 

Discharging too deeply

 

We recommend not to discharge the batteries completely. If this happens often, it will also result in 

premature wear. Keep a close eye on the battery indicator, connect the battery charger in time.  

 

Adapted charger.

 

The batteries should be charged with a correct charger and during a specific period. If the charging 

current is too low, or if the duration of the charging process is too short, the batteries will not be fully 

charged and the capacity of the batteries will be too low for your application, resulting in premature 

wear. If the charging current is too high, or if the duration of the charging process is too long, the 

battery can be overcharged. As a result, the plates of your battery will overheat and may become 

damaged. 

 

Intermediate charging

 

If, for example, the batteries are empty for only 60% and are reconnected to the charger, the batter-

ies will not get the time to relax. The temperature of the batteries will increase, resulting in prema-

ture wear. Also, the voltage of the battery will become higher than the actual energy condition, 

which means that the discharge limiter will no longer work correctly. 

 

Ambient temperature

 

The temperature of the battery may not get too high, as the acid will become more aggressive. Here, 

we are thinking of greenhouses and other heated spaces.  

 

Frequent use

 

If, every 7 days, the batteries are used on more than 5 days, they will also wear more quickly. When 

selecting batteries, it is important to take into account the Multi-Mover XL75's frequency of use.

 

If 

the batteries are used very frequently and intensively, it will be necessary to select the 140AH/20h 

battery instead of the standard 100AH/20h battery.

 

 

Sulphation

 

A battery will slowly discharge as a result of automatic discharge. If a battery remains in a discharged 

condition, it will start to sulphate and become damaged beyond repair. We therefore recommend 

recharging the stored Multi-Mover XL75 every 2 months.  

 

It is also possible, that there are still standby consumers in a switched off Multi-Mover XL75 (key igni-

tion etc.), which will mean that the batteries will discharge more quickly.   

In that case, regular recharging of the batteries is recommended. 

 

Immediate recharging of an empty battery, significantly promotes a longer life span. Further dis-

charging than 20% has a negative effect on the life span. 

 

The gases that are released while charging the battery are highly explosive (detonating gas).  

Therefore, avoid fire and sparks near the charging location.  

Содержание XL75






















Отзывы: