3
100 SERIES COLD CLIMATE FLUSHING SYSTEM
Programming Unit
PROGRAMMING HYDRO-GUARD UNIT FOR OPERATION
your device during installation. On
Android, location services must
be enabled in order for the App to
connect to the BL-KR device.
3.
Launch the application on
your Smartphone or Tablet.
4.
Associate the controller with
your phone by tapping the Add a
Controller button.
5.
The app will now ask what type of
Bluetooth device you would
like to add:
NOTE: The BL-KR V1.0 and
BL-KR V2.0 have identical
hardware and software
configurations. The only distinction
is the outside plastic housing.
6.
The App will now search for
devices in range.
7.
Choose the Controller.
The serial
numbers that populate the device
list can be found on the label
located on the back of the
controller housing with the
designation “Default name.” The
App will indicate that it is in the
process of connecting.
8.
Once the device is connected, it
will appear on the home screen when
you launch the Application.
Application Home Screen:
To add
another
controller, tap
the plus sign
in the upper
right hand
corner of the
home screen.
Device Home Screen:
NOTE: You can associate up to 400
devices with the K-Rain BL-KR App.
The number of devices is limited
to the internal memory on the
Smartphone/Tablet.
100 Series Cold Climate
(Requires Bluetooth Controller)
The BL-KR battery powered
irrigation module communicates
with the K-Rain BL Application on
a Smartphone or Tablet by using
Bluetooth SMART 4.0, (low energy)
on an iPhone with iOS version 7
minimum or an Android phone/
tablet with Marshmallow version 6.0
or higher.
Important
CAUTION: For use only with
9V DC Latching Solenoids.
As some solenoids will come
from the manufacturer with the
plunger already magnetically
latched open, some zones will
default to OPEN. Follow the
start-up procedure for systems
with DC Latching Solenoids.
CAUTION: For every change
to the program in the Mobile
App, you must exit back to the
home screen and tap the blue
TRANSMIT button
(bottom right corner). The
Application aggregates
changes and transmits them to
the controller when you have
finished programming.
CAUTION: Programs A, B, and
C are independent programs,
including start times, run
times, watering days, and
water budget.
1. Install the App:
– From the App
Store or Google Play Install
the free K-RainBL App:
2. Install a 9 Volt Battery in the
Controller:
– Unscrew the cap,
remove the seal and fasten the
battery to the correct terminals.
Replace the seal and cap and hand-
tighten the cap to ensure it seals.
NOTE: Before you launch the App,
you will need to enable locations
services on your phone/tablet in
order for the App to geolocate
!
!
!
