Muller Ziegler Multi-E-MU Скачать руководство пользователя страница 3

 

Introduction 
 

The measuring converters Multi-E11/E4/E-MU serves for the simultaneous conversion and separation of current, 
voltage, frequency, active power, reactive power, apparent power and the power factor with sinusoidal shape of 
curve  in  11(Multi-E11-MU)  or  4(Multi-E4-MU)  load  independent  direct  current  and  direct  voltage  signals.  The 
Multi-E-MU does not have analog outputs. The measurement is possible in alternating current systems and three 
or  four  wire  three  phase  alternating  current  systems  with  equal  or  any  other  loading.  The  29  quantities  being 
measured  can  be  displayed, stored  and  configured  through  an  10MBits/s  Ethernet  LAN  interface  on  the  PC.  The 
internal memory of the transmitters, up to 13,000 measured values can be stored. Furthermore, you can show the 
measurement results via a web browser or via HTTP-, TCP/IP- or Modbus TCP-protocol to process and read. Two 
further outputs can be used as limit values or impulse outputs. The switching status of the limit value outputs or 

impulse outputs is indicated over two LED’s. 

 

The  program  “Multi

-E11/E4/E-MU  Tool"  is  used  to  configure  the  inputs/outputs  of  measuring  converters.  The 

software has a user interface that is simple to use. With the aid of the software, all measured data belonging to the 
multifunction transducer can be displayed and stored in a text or excel file. In this way series of measurements can 
be logged over very long periods of time and graphically evaluated. Data transmission takes place via an Ethernet 
LAN interface with the LAN cable supplied. 
The  program  for  the  Multi-E11/E4/E-MU  can  be  used  with  the  following  operating  systems:  Windows  2000, 
Windows XP, Windows Vista, Windows 7 and Windows 10.  

 

Connection of a Multi-E11/E4/E-MU to the PC 

 

Open up the clear screen over the  Ethernet  LAN interface on the Multi-E11/E4/E-MU. Connect up the computer 
and  the  measuring  transducer  using  the  LAN  cable  supplied.  The  measuring  transducer  auxiliary  supply  must  be 
connected  in  order  for  data  transfer  to  take  place.  When  the  connection  between  the  computer  and  the  Multi-
E11/E4/E-MU is no longer in use, remove the LAN 

cable and cover the transducer’s 

Ethernet LAN box with the clear 

screen.  When  connecting  a  Multi-E11/E4/E-MU  to  a  battery-powered  computer  (e.g.  laptop),  there  may  be 
interference to the transfer of data due to radiation caused by high-frequency electromagnetic fields (>6V/m). 
 

Attention!

  The  Ethernet  LAN  interface  is  galvanically  connected  to  the  Multi-E11/E4/E-MU 

outputs! 

 
 

Network configuration 
 

Connect  the  Multi-E11/E4/E-MU  to  the  computer  or  network  and  connect  the  auxiliary  supply  to  the  measuring 
transducer. Open your web browser and enter the standard IP address of the Multi-E11/E4/E-MU (192.168.2.2 or 
e.g.  "Multi-E11-MU", see rating plate) into the address bar. The following web site should appear. 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

     

        

Website Home 

Содержание Multi-E-MU
























Отзывы: