13
For Multi-E4/E-MU:
This program menu allows you to configure the current inputs. Enter the nominal current (between 300
–
10000 mA,
1
–
20 A directly or 1
–
50000 A via transformers). The input current measured value can be between A and mA. Any
input values outside of these ranges are displayed as an error message.
„Current L1, L2, L3“ menu Multi
-E4/E-MU
“Input current”
This option allows you to choose between direct current measurement (max. 2 A or max. 6 A) or current measured
on current transformers with a secondary current of 1 A or 5 A. When measuring current on current transformers,
enter the current transformers’ primary current in the box “Transformer –
primary current in amps”. Transformer
currents of up to 50000 A can be entered.
“Frequency” menu
For Multi-E11-MU:
The “frequency” menu allows you to input the frequency range and configure the corresponding output (e.g. 4 –
20
mA / 2
–
10 V). The measurable frequency range is between 40 Hz and 100 Hz. A partial range, of 45
–
55 Hz for
example, should be selected to achieve a higher resolution of the frequency measurements. Measurement ranges of
0
–
100 Hz can be entered. The smallest frequency measurement span is 10 Hz.
„Frequency“ menu
Multi-E11-MU
