Muller Elektronik SPRAYDOS, Инструкция по установке и эксплуатации

Страница: 27 / 30

Copyright Müller-Elektronik GmbH & Co.KG, Installation and operating instructions SPRAYDOS (07.2016) Page - 27 -
 You have taught the computer where the right side is.
>
- Move the drawbar to the centre position .
 The drawbar is centred.
>
- Turn the control dial to the centre position.
>
Lift the magnet briefly and apply it again.

The LED flashes briefly.
 You have calibrated the centre position .
>
- Move the drawbar as far as possible to the right .
 The drawbar reaches the end stop at the right.
>
- Turn the control dial to the centre position.
>
Lift the magnet and apply it again.
>
The LED flashes briefly.
 You have calibrated the maximum right position.
>
- Move the drawbar as far as possible to the left .
 The drawbar reaches the end stop at the left.
>
- Turn the control dial to the centre position.
>
Lift the magnet briefly and apply it again.

The LED is illuminated.

You have calibrated the maximum left position.
 The calibration is complete.
>
Lift the magnet.
 LED is off.
 Calibration mode is terminated.