About these Operating Instructions
Diagrams in this manual
2
30322332-02-EN
V2.20160912
7
About these Operating Instructions
Diagrams in this manual
The screen shots of the software interface are intended to serve as a reference. They help you in
finding your way around the software screens.
The information shown on the screen depends on various factors:
▪ the type of implement,
▪ the configuration of the implement,
▪ the status of the sensors and actuators.
For this reason, the pictures in these operating instructions may show different information than the
display on the terminal.
All screen shots used in this manual were made on a COMFORT-Terminal provided by Müller-
Elektronik. On other ISOBUS terminals, the layout of the function icons may be different, since every
ISOBUS terminal determines its own layout.
Several icons look different depending on whether the trailed implement has drawbar or stub axle
steering. They still both have the same function.
In the manual, we use the icons depicting a drawbar. For each of these icons, there is a
corresponding icon depicting an axle with wheels. You can find an overview in the table: Layout of the
work screen [
Directional information in these instructions
All directional information in these instructions, such as "left", "right", "forward", "back", is relative to
the movement direction of the vehicle.
Layout of references
If any references are given in these Operating Instructions, they will appear as:
Example of a reference: [
References can be identified by their square brackets and an arrow. The number following the arrow
shows you on what page the section starts where you can find further information.
Layout of operating instructions
The operating instructions explain step by step how you can perform certain operations with the
product.
We use the following symbols throughout these Operating Instructions to identify different operating
instructions:
Type of depiction
Meaning
1.
2.
Actions that must be performed in succession.
⇨
Result of the action.
2
2.1
2.2
2.3
2.4
