3
Assembly instructions
Connecting the components
10
3030248960-02-EN
Connecting the components
NOTICE
Kink damage to the antenna cable
The antenna cable can become damaged if it is bent during installation.
◦ Do not bend the antenna cable.
To connect the components:
You have installed the holding bar with the GPS receivers.
You have installed the connection box for the GSM modem. You can find more
information on the installation of the GSM modem in the corresponding
instructions.
1.
Route the GPS receiver cable from the GSM modem connection box out of the
vehicle cab.
2.
Connect the cable to the the junction box on the main bar.
3.
Check whether the connection box of the GSM modem is still correctly
connected with the antenna and the steering job computer.
⇨
You have successfully connected the components.
3.3
Procedure
