5
Basic control principles
Restarting the terminal
18
Copyright © Müller-Elektronik GmbH & Co.KG
⇨
You are now in the selection menu.
⇨
Now the connected jobcomputers will be loaded. The progress of this process is indicated
by the progress bar next to the jobcomputer icon. The time taken to complete this process
depends on the number of connected jobcomputers.
5.
Wait until all jobcomputers have been loaded.
⇨
The following screen
will appear:
All jobcomputers are loaded when no more progress bars are displayed.
6.
In the selection menu you can select which application you wish to display next.
7.
- Select the "Service" line. The "Service" line must be framed by a black square:
8.
- Click on the "Service" line.
⇨
The following screen will appear:
⇨
You have opened the "Service" application.
9.
Configuring the terminal in the Service application [
Restarting the terminal
When restarting the terminal, you must give the connected jobcomputers enough time to restart as
well. For this reason, always wait approx. 30 seconds after switching off the terminal before switching
the terminal back on.
1.
- Switch off the terminal.
5.4
Procedure
