17
10
Before Use
②
Before Use
②
Connecting the power cord
C
onnect the power plug to the socket.
1
2
I
nsert the power cord into the slot of the body.
C
onnect the power cord.
I
nsert power plug into socket.
*
P
lease insert fully to the end.
*
T
he product will beep.
a
b
P
ower cord
P
ower cord
slot
U
p
D
own
P
lug
(product end)
P
ower plug
(socket end)
A
fter inserting into socket as
shown, it will be ready to use.
C
hanging the sensor's sensitivity
(Set on Mild at time of purchase)
Sensors
E
asily detectable by the dust sensor
W
hen changing to Sensitive
T
he buzzer will sound "
Beeeep, Beep
"
*
U
nplugging the product will reset the sensor to Mild
P.16
E
asily detectable by the smell sensor
W
hen changing to Mild
T
he buzzer will sound "
Beeeep, Beep Beep
"
Dust Sensor
Smell Sensor
Sensors
T
his product is equipped with a dust sensor which detects dirt in the air and a smell
sensor which detects smells in the room.
I
n Auto mode, when the sensors detect dust or smell, it will control the air volume accordingly.
*
T
he sensors only operate in Auto Mode. Please refer to
H
ouse dust (dust, corpse and faeces of ticks,
pollen, spores of mold), cigarette or incense
smoke, pet hair
C
igarette, incense, make-up, alcohol,
sprays, pets, cooking/food odours
W
hen in Auto mode, the rotation of the fan is finely controlled depending on the monitoring
status of the 2 sensors. The sensitivity level of the sensor can be chosen from the normal
setting of Mild, or a higher sensitivity level of Sensitive. When you want to change the
sensitivity level higher during Auto mode, use the Sensitive setting. To change the sensor's
sensitivity level, press the Jet Cleaning Mode button and Change Modes button at the same
time for more than 2 seconds, while the power is turned off.
*
P
lease refer to the diagram below to change the sensor's sensitivity level.
T
o change the sensor's sensitivity
Press these 2 buttons at the same time for over 2
seconds while the power is OFF.
M
空清
_
Manual Size:148.5x210
BALMUDA Inc. 2015/03/20
