Muir HFF 600S, Руководство пользователя

Страница: 11 / 16

T H E W O R L D P O W E R I N A N C H O R I N G S Y S T E M S
HFF600S MANUAL WWW.MUIR.COM.AU Page: 11
5a. Removing Peeler
(P/N. P05PLRALL0600C)
& Stripper
(P/N.
P19-STR3040600C)
. Place 3/16” Allen key into (F) SHC
Screw and turn anti-clockwise to remove.
5b. Now place Screwdriver (Phillips head) into (G)
and turn anti-clockwise to remove. Now the Peeler
& Stripper can be removed.
6. Removing Gypsy
(P/N. P10-F0600BC)
. The Gypsy can
now be taken off the main shaft (H).
To complete the service or replacement of parts reverse the
above steps.
Note: We recommend the use of Lithium/Teflon based grease.
• Before re-assembly, grease the exposed Main
Shaft/cone (I) & Gypsy bore (J).
Line Care
Using the wrong type of line may cause the line to jam
causing excessive line wear. Muir Windlasses are designed
to run on 3-strand nylon line (supplied by Muir) which has
been specially treated with fabric softener to prevent it
from hardening. It is recommended to soak your rope in
fresh water containing fabric softener every 3 months.
In case of a rope jam, slacken off the windlass clutch to
free the jammed line. When retrieving the anchor rode do
not continue to run the windlass if the anchor or chain is
jammed, as line slippage in the gypsy will cause damage
to the line.
F
G
H
I
J