Insert the spray wand into the
trigger gun and rotate to lock in
place.
Attach a nozzle to the end of the
spray wand. See “
Using the Noz-
zles
” section of this manual for
further details.
10. Ensure that the switch On/Off is in
the OFF position before plugging
the unit into the power outlet.
11. Ensure that the electrical supply
voltage corresponds to that speci-
fied on the pressure washer rating
plate. If the power supply is
correct, you may plug the pressure
washer into the power outlet.
WARNING!
The intake water temperature must not exceed 140°F / 60˚C!
CAUTION!
The pressure washer must only be used with clean water; use
of unfiltered water, or water containing corrosive chemicals will damage
the washer.
NOTE:
The machine is not suitable for connection to a portable water
main.
!
9.
8.
NOTE:
Check that the water filter
is fitted in the inlet water hose
adapter and that it is not clogged
up.
Reset
Power light
indicator
GFCI
8
