4. Turn on the pressure washer. Hold the trigger to operate the unit. The
liquid detergent will automatically mix with water and be discharged
through the nozzle.
5. Allow the detergent to remain on the surface for a short time before
detaching the detergent bottle and rinsing. Do not allow the detergent to
dry on the surface.
CAUTION!
Damage may occur to painted surfaces if the detergent is left
to dry on the surface. Wash and rinse a small section at a time. Avoid
working on hot surfaces or in direct sunlight.
6. Once finished using the detergent, fill the detergent bottle with fresh
water. Siphon water at low-pressure for one minute to rinse the bottle
until it is thoroughly cleaned.
CAUTION!
Failure to follow these cleaning instructions will cause the
injection system to become clogged and inoperable.
7. Press the yellow button on the top of the detergent bottle and detach the
bottle from the adapter.
SHUTTING DOWN
1. Turn the power switch to the OFF position and unplug the power cord
from the outlet.
2. Turn off the water supply.
3. Hold the trigger on the trigger gun to release water pressure.
WARNING!
You must depressurize the unit! Failure to do so could result
in personal injury due to discharge of high-pressure water unexpectedly.
6. Disconnect the other end of the
high-pressure hose from the washer
by pressing the hose release button
and pulling the hose out.
7. Engage the gun safety lock on the
trigger gun.
5. Disconnect the high-pressure hose
from the trigger gun by pressing the
quick release lever and pulling the
hose down.
4. Disconnect the garden hose from the
water inlet on the unit.
12
