background image

Mueller refers to one or more of Mueller Water Products, Inc. a Delaware corporation (“MWP”), and its subsidiaries. MWP and each of its subsidiaries are legally separate and independent entities when providing products and services. 

MWP does not provide products or services to third parties. MWP and each of its subsidiaries are liable only for their own acts and omissions and not those of each other. MWP brands include Mueller

®

, Echologics

®

, Hydro Gate

®

Hydro-Guard

®

, HYMAX

®

, Jones

®

, Krausz

®

, Mi.Net

®

, Milliken

®

, Pratt

®

, Pratt Industrial

®

, Singer

®

, and U.S. Pipe Valve & Hydrant. Please see muellerwp.com/brands and krauszusa.com to learn more.

© 2020 Mueller Co., LLC. All Rights Reserved. The trademarks, logos and service marks displayed in this document are the property of Mueller Co., LLC., its affiliates or other third 

parties. Products above marked with a section symbol (§) are subject to patents or patent applications. For details, visit www.mwppat.com. These products are intended for use in 

potable water applications. Please contact your Mueller Sales or Customer Service Representative concerning any other application(s). 

 F 14286 10/20

For more information about Mueller or to view our full line of water products, please visit www.muellerwp.com.
For customer support or to report any product issues, please call 1.800.423.1323 or email [email protected].

WARNING

FOR WEAK SIGNAL STRENGTH CONSIDER MOVING 
SMART HYDRANT TO AN ALTERNATE LOCATION 
WITH BETTER CELLULAR COVERAGE. INSTALLATION 
AT CURRENT LOCATION MAY CONTINUE; HOWEVER, 
POOR TRANSMISSION OF CELLULAR SIGNAL, POSSIBLE 
LOSS OF DATA, POOR BATTERY LIFE, AND POTENTIAL 
CHALLENGES RECEIVING OVER AIR UPDATES MAYBE 
ENCOUNTERED WITH CURRENT LOCATION. 

APPENDIX  A

Figure 1: Signal Strength Feedback: Weak

Figure 2: Signal Strength Feedback: Strong

Figure 3: Success Feedback

Содержание SENTRYX SUPER CENTURION









Отзывы: