Muck-Truck MAX Mk II Dumper, Инструкция по эксплуатации, аксессуарам и запчастям для владельца

Страница: 8 / 30

GB – 8
To Empty Skip
1. Stop unit and release parking brake lever.
2. Release the skip lock by squeezing the skip release
lever.
3. Jerk both handlebar handles upwards. The skip will
pivot forward and dump the load.
To Reset Skip
1. Pull back on the skip.
2. Engage the skip lock by releasing the skip lock
lever.
3. Ensure that skip lock has engaged before moving
unit.
MAINTENANCE CHECK LIST
Perform routine checks as outlined below. Correct any
problems before using unit.
* SAE 10W-30 oil is recommended for general use. Refer
to engine manual for engine maintenance procedures.
Tire Pressure
1. Check tire air pressures regularly. Recommended
inflation pressure is 30 psi for all tires.
LUBRICATION
Apply spray
lubricant to skip
release as
necessary. DO
NOT use oil or
grease.
MAINTENANCE
Component Daily Weekly
Skip Lock Spring X
Drive Belt Tension X
Parking Brake Adjustment X
Control Cable Condition and Adjustment X
Air Cleaner X
Engine Oil Level * X
Tire Pressures X
Attaching Hardware X
CAUTION: Avoid injury! Explosive separation of
tire and rim parts is possible when they are
serviced incorrectly:
• Do not attempt to mount a tire without the
proper equipment and experience to
perform the job.
• Do not inflate the tires above the
recommended pressure.
• Do not weld or heat a wheel and tire
assembly. Heat can cause an increase in
air pressure resulting in an explosion.
Welding can structurally weaken or deform
the wheel.
• Do not stand in front or over the tire
assembly when inflating. Use a clip-on
chuck and extension hose long enough to
allow you to stand to one side.
Apply
spray
lubricant.