MTU 20 V 4000 G23 Скачать руководство пользователя страница 137

Страница: 137 / 178

132

Task Description

6.13

Oil Cooling / Filtration

6.13.1

Engine oil filter – Replacement

Preconditions

• Engine is stopped and starting disabled.

Special tools

Designation / Use

Part No.

Qty.

Filter wrench

F30379104

Material

Designation / Use

Part No.

Qty.

Engine oil

Spare parts

Designation / Use

Part No.

Qty.

Oil filter

WARNING

Hot oil.
Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.

• Do not inhale oil vapor.

Engine oil filter – Replacement

1. Remove oil filter using the filter wrench.
2. Clean the sealing surface of the filter head.
3. Check condition of the new sealing ring and

coat it with oil.

4. Screw on and tighten new oil filter by hand.
5. Replace further oil filters in the same way.
6. After each oil change and filter replacement, bar

engine with starting system (

7. Check oil level (

M015715/00E 06-08

Содержание 20 V 4000 G23



















































































































































































Результаты поиска

Содержание 20 V 4000 G23

Отзывы:

Бренды по названию

Популярные бренды

MTU 20 V 4000 G23, Техническая публикация

Результаты поиска

Содержание 20 V 4000 G23

Отзывы:

Бренды по названию

Популярные бренды